Blog

The parallel operation of slurry pump is a working method in which two or more pump outlets deliver fluid to the same pressure pipeline. The purpose of parallel operation is to increase the flow rate.

limestone slurry pump control is an important part of FGD operation.

ZJL vertical slurry pump and SP submerged slurry pump are both vertical slurry pumps.

When it comes to slurry transportation, familiarity with pumps and their parts is par for the course. However, it's also important to understand what goes into each element of slurry transport.

This paper mainly explains the type, structure, and model of the ZJ series slurry pump in the slurry pump.

During operation, there are four types of common failures of slurry pumps​: corrosion and abrasion, mechanical failure, performance failure and shaft sealing failure. These four types of failures often affect each other.

The operation of mechanical seals directly affects the normal operation of the slurry pump.

The Slurry Pump is a Industrial Pump that conveys a mixture of solids and water.

At present, the lubrication methods of slurry pump bearings are grease lubrication and thin oil lubrication.

In the applications of slurry pumps, frequency conversion operation is sometimes required.

The 6/4 AH slurry pump, the ultimate solution for all your solids handling and pumping needs. This innovative pump is designed to effectively handle abrasive and corrosive slurries, making it ideal for applications in mining, mineral processing, power generation and other industries. With its advanced technology and superior performance, the 6/4 AH slurry pump provides a reliable and cost-effective solution to your toughest pumping challenges.

The DAM073 stuffing box is a spare part for the 6/4D-AH slurry pump. It is designed for the stuffing box assembly in the pump's shaft sealing area. CNSME supplies slurry pump spare parts for different pump models, helping customers identify the correct components by pump model and part number. Contact us to confirm compatibility and material requirements before ordering.

The stuffing box is installed at the shaft seal section of the slurry pump, located at the connection between the pump body and the pump shaft. Its primary function is to prevent slurry leakage along the shaft, provide effective sealing protection, and ensure stable and reliable pump operation under abrasive slurry conditions.

As a critical sealing component of the 3/2C-AH slurry pump, the stuffing box helps protect the pump shaft and pump casing, improves sealing efficiency, and significantly extends the service life of the pump.

Stuffing box is mainly used for gland seal slurry pump, but may also play an auxiliary role in some special sealing program. Its role is to fix the packing, provide sealing space, and allow the right amount of lubrication and cooling to ensure that the pump shaft long-term stable operation.

The CNSME 400ST-L Light Duty Slurry Pump belongs to the L range of slurry pumps, developed for industrial slurry transportation duties. Its large suction and discharge connections support high-volume flow requirements, while the performance curve helps engineers evaluate suitable combinations of flow rate, head, and rotational speed.

The 400ST-L features a closed metal impeller with an 825 mm diameter and the basic impeller code STL10147. The supplied technical chart specifies metal materials for both the impeller and liner.

The L range offers metal and elastomer material options across its listed models, except model 20A-L. The appropriate configuration depends on the slurry characteristics, operating conditions, and required wear resistance.

For reliable operation, the pump should be selected according to the required flow rate, total dynamic head, slurry properties, and system conditions.

The Slurry Pump Base is typically located at the bottom or as part of the supporting structure, fixed to the pump’s frame or base. It is usually connected to key components such as the motor, pump casing, and bearings.

A slurry pump base is usually located at the bottom of the pump or as part of a support structure fixed to the pump's frame or base. It is usually connected to key components such as the motor, pump casing, and bearings.

The 10/8FF-GH gravel pump is a heavy-duty centrifugal pump engineered for handling highly abrasive slurries with extra-large solids. With a maximum particle size of 178 mm, it is specifically designed for demanding applications such as dredging, mining, and coarse tailings transport.

Equipped with an FF frame (425 kW power rating), this pump delivers superior structural strength, ensuring stable and reliable operation under continuous heavy-duty conditions.

Casing SP10092A05 forms an important part of the pump wet end and provides a suitable flow passage for slurry handling. CNSME supplies replacement slurry pump casings and wet-end parts for SP series vertical pumps, with dimensional and material options available according to application requirements.

The GPS10041A05 Back Liner is the back liner used in the 100VE-GPS Slurry Pump and is an important component of the pump's wet end.

The OEM open impeller has a series of vanes attached to a central unit. This is done for the mounting on the shaft. However, this design is more sensitive to wear and tear of the blades.

Gravel Pump Bowl is a important role for Gravel Pump Wetted End Parts, is also called Gravel Pump Casing and Gravel Pump Volute.

CNSME®8/6F-AH horizontal slurry pump is a high-efficiency, wear-resistant, corrosion-resistant single-stage single-suction, cantilever, horizontal centrifugal slurry pump, which widely used in mining, electric power, metallurgy, coal, chemical industry and other industries. It is suitable for pumping highly abrasive, high-concentration slurry or low-concentration high head slurry. It can be used in multiple stages in series under the pump's max. allowable working pressure range.

CNSME®8/6E-AH horizontal slurry pump is a high-efficiency, wear-resistant, corrosion-resistant single-stage single-suction, cantilever, horizontal centrifugal slurry pump, which widely used in mining, electric power, metallurgy, coal, chemical industry and other industries. It is suitable for pumping highly abrasive, high-concentration slurry or low-concentration high head slurry.