Horizontal Wear-resistant Slurry Pumps Have The Following Performance Characteristics

Horizontal wear-resistant slurry pump refers to a device that converts electrical energy into kinetic energy and potential energy of the medium by increasing the energy of solid and liquid mixture by the action of centrifugal force (rotation of the impeller of the pump).It is mainly suitable for mining, power plants, dredging, metallurgy, chemical industry, building materials and petroleum industries.　　The horizontal wear-resistant slurry pump adds a self-priming tank, so that the inlet of the slurry pump is connected to the bottom of the self-priming tank, and the top of the self-priming tank is connected to the suction tube and the suction tank.Before the slurry pump is started, the self-priming tank will be filled with clear water or slurry. After starting, some of the liquid in the tank will be discharged. Because the self-priming tank is an airtight container, the discharge of the slurry will form a certain vacuum. At this time, the atmospheric pressure will press the slurry in the slurry tank into the self-priming tank to form a circulation. At this time, it is necessary to note that the liquid level in the self-priming tank should be higher than the liquid level of the suction port of the slurry pump, which has achieved the purpose of providing slurry to the slurry pump, so as to ensure that the slurry pump can operate normally and continuously, and the slurry in the slurry tank is emptied by the upsuspended function of the slurry pump.　　Property features:　　1. This series of slurry pumps are horizontal and double pump housing structures. The pump body and pump cover have metal linings. The lining can be used until it is worn out without replacement, extending the maintenance cycle and reducing operating costs.　　2. The outlet direction can be rotated and installed at eight angles.　　3. The bearing assembly adopts a unified structure, which facilitates the adjustment of the clearance between the impeller and the front guard plate, and can be removed as a whole during maintenance.The bearing is lubricated with grease.　　4. The shaft seal types include packing seal, impeller seal, and mechanical seal.　　5. Wide performance range, good cavitation performance and high efficiency.Multi-stage series technology can be used to meet long-distance transportation.　　6. The transmission methods include V-shaped triangle belt transmission, elastic coupling transmission, gear reducer transmission, hydraulic coupling transmission, frequency converter drive device, thyristor speed regulation, etc.Among them, the V-shaped triangle belt transmission includes CL, CV, CR, ZL, ZV, and ZR transmission.　　7. Overcurrent components are available in a variety of metal materials and increase depth.　　8. Adopt various speeds and variations.