Blog

18/16T-G (CNSME Model SG/400G) Shield Slurry Pump, with a weight about 8.7 tons and a minimum dismantle clearance of 640mm, is often driven by a 1100kW motor. Its common accessories include shaft sleeve, packings, lantern ring, throatbush, frame plate liner insert, impeller and casing etc.

Quartz sand beneficiation focuses primarily on purification, a technically challenging separation process aimed at removing minor or trace impurities from quartz sand to produce refined quartz sand or high-purity quartz sand. Common purification techniques employed domestically and internationally include: Washing, Classification & Desliming, Scrubbing, Magnetic Separation, Flotation, Acid Leaching, and Microbial Leaching.

Selecting the right slurry pump ensures efficient performance, especially when dealing with high-volume and abrasive slurries. The ideal pump depends on the application, material compatibility, and operational demands.

Because of their strong durability, efficiency, and ability to adapt, these heavy duty slurry pumps help businesses achieve more and pay less. If you handle abrasive slurries, sand, gravel, or even froth, these machines can handle any situation.

The following techniques can be used to determine whether cavitation is occurring in a slurry pump:a. Ultrasonic testing b. External noise monitoring c. Vibration analysis

This material combines the wear resistance of high-chrome alloys with excellent corrosion resistance, particularly against acidic media. It is ideal for phosphoric and nitric acid pumps, offering outstanding performance and long service life.

The vibration issues in desulfurization circulation pumps can generally be attributed to the following factors:Installation Issues: Unstable foundation, misaligned couplings, or improperly installed discharge pipelines.

Because they offer longevity, efficiency, and adaptability, horizontal slurry pumps are crucial for sectors handling abrasive slurries. Knowing their values, applications, and maintenance needs allows businesses to maximize performance and reduce expenses.

Slurry pump commissioning must be strictly conducted in accordance with established procedures: Prior to startup, first activate the shaft seal water and adjust it to the specified pressure. Fully open the inlet valve. For non-backflow pumps, water must be injected. After opening the outlet valve to one-quarter, initiate startup; During operation, monitor flow rate, head, current, vibration, and bearing temperature (temperature rise ≤35°C, maximum ≤75°C). Mechanical seal leakage should be ≤3-5 ml/h. Before stopping the pump, flush with clean water for 30 minutes, close the outlet valve first, then shut down the pump, and finally close the shaft seal water and inlet valve. It is strictly prohibited to fully open the outlet valve when stopping the pump to prevent water hammer. Throughout the entire trial operation process, ensure that parameters remain stable, avoid cavitation and overload conditions, to ensure safe operation of the equipment.

Slurry pump including 6 performance parameters: flowrate, efficiency, head, speed, shaft power, permissible suction vacuum height, and NPSHr (net positive suction head)

The seal of the Expeller of the slurry pump is sealed by the hydrodynamic action, which belongs to the non-contact seal. The air or clean water generates pressure under the rotating action of the Expeller, and forms an air slurry or water slurry balance with the slurry at the outer edge of the Expeller, thus resisting the leakage of the liquid at the outlet of the main impeller.

Slurry pump lip seal , also known as slurry pump shaft seal ring, C090 is a sealing spare part for 3/2C-AH slurry pumps.

Vertical Slurry Pump Long Shaft is a key rotating component designed for vertical sump slurry pumps and other vertical slurry handling equipment. It connects the motor drive system with the impeller assembly, transmitting power to ensure stable rotation and efficient slurry pumping performance.

C024-10E62 End Cover of 3/2C-AH and 4/3C-AH Slurry Pump Parts，Slurry Pump Cover Plate is in suction end of split casing slurry pump. It's the outer shell of the radial subdivision, and combined with Frame plate together make up the complete pump body.

Slurry pump labyrinth locknut basic part number is 061, its function is to fasten the labyrinth of drive end.

The Slurry Pump Shaft 073 is manufactured from high-quality alloy steel and processed through precision machining to achieve excellent strength, rigidity, and wear resistance. It is designed to withstand high torque loads, continuous operation, and demanding slurry pumping conditions.