Blog

A great conclusion to the Turkish Mining Show, thanks to our customers for visiting our booth at the Istanbul Mining Show in Turkey held at the Tuyap Fair Exhibition Center

As a leading enterprise in the slurry pump industry, CNSME has been committed to technological innovation and product optimization, continuously enhancing product quality and performance

CNSME Slurry Pump Company is proud to announce our participation in the upcoming mining exhibition in Istanbul

China's slurry pump suppliers will participate in MiningWorld Russia, a mining and mining machinery and equipment exhibition held in Russia

Dredger pump is specially designed for the excavation of silt, gravel, mud and other bottom mud material pump.

Whether in mining, ore dressing plants, or other industrial sectors, this 3/2 high head slurry pump will be your dependable assistant.

After the desulfurization pump bearing seat ring is matched, the bearing cover is added outside, and the embedded flange is just against the bearing outer seat ring, and then the bearing cover is fixed on the bearing seat with screws.

A hard metal slurry pump is a type of pump used for transporting high-concentration slurries containing solid particles.

CNSME(Slurry Pump supplier) is exhibiting at PDAC 2024, the world’s premier mineral exploration & mining convention, being held in Toronto, Canada, March 3-6.

As one of the world's leading slurry pump manufacturers, CNSME is gearing up for the Canadian Mining Expo 2024

CNSME®8/6F-AH horizontal slurry pump is a high-efficiency, wear-resistant, corrosion-resistant single-stage single-suction, cantilever, horizontal centrifugal slurry pump, which widely used in mining, electric power, metallurgy, coal, chemical industry and other industries. It is suitable for pumping highly abrasive, high-concentration slurry or low-concentration high head slurry. It can be used in multiple stages in series under the pump's max. allowable working pressure range.

CNSME®8/6E-AH horizontal slurry pump is a high-efficiency, wear-resistant, corrosion-resistant single-stage single-suction, cantilever, horizontal centrifugal slurry pump, which widely used in mining, electric power, metallurgy, coal, chemical industry and other industries. It is suitable for pumping highly abrasive, high-concentration slurry or low-concentration high head slurry.

The SV heavy duty cantilever sump pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer.

The 100RV-SP vertical slurry pump is designed for pumping abrasive and corrosive liquids and slurries, and can be submerged in sump or deep pits. It is suitable for applications that require reliability and durability higher than traditional vertical process pumps. It is mainly used for pumping highly abrasive, highly corrosive, highly concentrated slurries containing suspended solid particles.

Spare Parts for Vertical Slurry Pumps
Metal casing can be used for sp vertical slurry pump
Material: Metal
Casing is an important wear part of the vertical slurry pumps. It forms a slurry pump chamber where the slurry would flow through.

Spare part door clamp ring for gravel pump is mainly used to connect and fix various parts of the pump to ensure sealing and stability. It plays a key role in the operation of gravel pumps, especially under high abrasion and vibration conditions.

Slurry Pump Packing is a critical sealing component installed inside the stuffing box of slurry pumps. It functions as a gland seal to effectively prevent leakage of slurry, water, or chemicals between the moving parts of the pump shaft and casing.

Froth Pump SF/50QV，froth pump,froth pump manufacturer designed and manufactured using the finest quality raw materials and the latest technology in accordance with the industry norms and standards.

Froth pumps, also known as foam pumps, are a kind of vertical tank slurry pumps. They are used for flotation process where froth is innevitable.

The 4/3D-AH and 4/3D-AHR slurry pumps are based on the same 4/3D pump platform but use different wet-end configurations for different slurry conditions. The 4/3D-AH is equipped with metal liners and a metal impeller, providing excellent wear resistance for highly abrasive slurry applications in mining, mineral processing, coal and other industries. It uses a D3147 impeller with a 245 mm diameter, a maximum speed of 2750 rpm and a maximum passage size of 36 mm. The 4/3D-AHR features polymer liners and a polymer impeller, using a D3147R impeller with a 215 mm diameter, a maximum speed of 1950 rpm and a maximum passage size of 28 mm. The two configurations allow users to select suitable wet-end materials according to slurry concentration, particle characteristics, abrasiveness and operating conditions.

CNSME 2/1.5B-AH horizontal slurry pump, dimension interchangeable with AH series pumps, B frame 15KW, A05 alloy wet parts, ISO9001 CE EAC certified. Send your slurry data for free quotation & performance curve.

1.5/1B-AH slurry pump is cantilever centrifugal slurry pump, which is suitable for transporting abrasive or corrosive slurry,which is widely used in mineral processing, metallurgy, petroleum, chemical industry, coal mining and other industries.

1.5/1B-AH Slurry Pump is end-suction, split-case, centrifugal slurry pumps have set the world standard for heavy duty abrasive pumping applications. With large shaft diameters, heavy duty bearing assemblies and robust slurry pumping capacity, Application customization comes standard with this line by applying a wide variety of metallic and elastomeric parts options, an assortment of seal arrangements, and a standard impeller adjustment mechanism incorporated into every base assembly.

The 3/2 AH slurry pump, manufactured by CNSME PUMP, adopts a metal closed impeller with 5 vanes and an impeller diameter of 214 mm. Equipped with gland sealing and a maximum passage size of 25 mm, it supports a maximum rotational speed of 3170 rpm with multiple frame power options (30/38/55/75 kW). Under clear water operating conditions, its flow range covers 0–180 m³/h with a maximum head of 90 m and peak efficiency up to 64%, suitable for diverse industrial and mining conveying applications.