When Using The Slurry Pump, Be Sure To Keep It In A Good Sealing State!

When using a slurry pump, you should pay attention to maintaining its good sealing effect. There are two types of sealing components of the pump: pump housing seal and shaft seal.The pump housing seal uses a front and rear guard plate \"0\" ring seal, and the shaft seal uses an auxiliary impeller mechanical seal.The pump housing seal should be tightly pressed on the \"0\" ring in the front and rear guard grooves to achieve the effect of the pump housing seal. The shaft seal is a mechanical seal that connects the auxiliary impeller to achieve the shaft seal effect.　　So why should we pay attention to keeping the slurry pump sealed?This is because the operation, leakage, dripping and leakage caused by poor sealing of pumps, serious consequences include: after fluid enters the pump bearing, it will dilute and change the quality of the lubricant, aggravate bearing wear, cause vibration, and shorten life.So we must keep it in good sealing condition when using it!In our industrial production process, such as centrifugal slurry pumps, the sealing effect of the pump should be well completed.The packaging of the filler box should be sealed, and the packaging of the filler box should be replaced and the cap should be pressed regularly. If mechanical seal is used, more attention should be paid to prevent vibration of the pump and pipes, and the sealing water should be carefully checked to prevent overheating and damage to the mechanical seal.The problem that still needs to be paid attention to is to choose a mechanical seal installation and consider the material of the dynamic and static ring to resist the corrosion of the working medium.