The 6/4 AH slurry pump, the ultimate solution for all your solids handling and pumping needs. This innovative pump is designed to effectively handle abrasive and corrosive slurries, making it ideal for applications in mining, mineral processing, power generation and other industries. With its advanced technology and superior performance, the 6/4 AH slurry pump provides a reliable and cost-effective solution to your toughest pumping challenges.

6/4D-G Gravel pump is a compact and reliable small gravel pump designed for small and medium flow rate and high abrasion conditions.

● Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage.  The wet-end parts material is hard alloy has good wear resistance, corrosion resistance and high reliability.
● The bearing assembly is designed with high capacity bearings, and the bearing adopts grease lubrication and oil lubrication to adapt to different working conditions.
● The gap between the impeller and the backliner can be adjusted to ensure the efficient operation of the pump.
● The shaft seal adopts packing seal, expeller seal and mechanical seal to meet the requirements of different working conditions.
● The pump and drive machine can choose DC drive, CV drive, ZVZ and other drive methods.

CNSME SH Slurry Pump is equivalent to warman AH Slurry Pump,It is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, AH High Chrome Alloy Slurry Pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosive liquids.

16/14TU-AH is a cantilever, horizontal centrifugal slurry pump, used for transporting highly abrasive and high density slurries in industries of metallurgy, mining, coal, power plants and construction.

14/12ST-AH slurry pump for single-stage single suction, cantilever, horizontal, centrifugal slurry pump, the pump belongs to the AH-type slurry pump, the introduction of foreign advanced technology manufactured from advanced design theory, excellent performance, can be used in multi-stage parallel tandem, withstand pressure, the pump belongs to the double-pump casing structure of the pump slurry pump, and its wet-end parts are made of high chromium wear-resistant metal and wear-resistant rubber.

CNSME Slurry pumps are designed with double casing, wet-end parts, and rotary parts. Wet-end parts includes volute, impeller, front and back liner. The rotary parts includes the bearing assembly, which are composed of bearing housing, shaft, bearings etc.

The wet-end parts of 4/3D-AH(R) slurry pump, such as impeller, volute liner and frame plate liner are made of high chrome alloy wear-resistant material, or wear-resistant rubber material. These materials have good wear resistance, which can effectively extent the service life of the pump, reduce replacement frequency and reduce maintenance costs.

AH slurry pumps are specially designed pumping equipment to transfer high density sludge that contains big solids, and are widely used in mining, construction, and petrochemical industries, with the advantages of abrasion resistance, large conveying capacity and not prone to clogging.

1.5/1B-AH slurry pump is cantilever centrifugal slurry pump, which is suitable for transporting abrasive or corrosive slurry,which is widely used in mineral processing, metallurgy, petroleum, chemical industry, coal mining and other industries.

AHF series horizontal froth pump is a high performance froth pump produced by CNSME, which is specially designed to handle heavy froth and high viscosity thick slurry.

10/8S-GH series gravel pump is specially designed for continously handling the most difficult higher abrasive slurries containing big solids. It is suitable for a variety of working conditions in Mining, Mineral Processing and other industries, such as gravel transportation, dredging, hydraulic mining, sugar beet processing, tunnelling, etc.