Warman Submersible Pumps Trend Report

Horizontal wear-resistant slurry pump refers to a device that converts electrical energy into kinetic energy and potential energy of the medium by increasing the energy of solid and liquid mixture by the action of centrifugal force (rotation of the impeller of the pump).It is mainly suitable for mining, power plants, dredging, metallurgy, chemical industry, building materials and petroleum industries.　　The horizontal wear-resistant slurry pump adds a self-priming tank, so that the inlet of the slurry pump is connected to the bottom of the self-priming tank, and the top of the self-priming tank is connected to the suction tube and the suction tank.Before the slurry pump is started, the self-priming tank will be filled with clear water or slurry. After starting, some of the liquid in the tank will be discharged. Because the self-priming tank is an airtight container, the discharge of the slurry will form a certain vacuum. At this time, the atmospheric pressure will press the slurry in the slurry tank into the self-priming tank to form a circulation. At this time, it is necessary to note that the liquid level in the self-priming tank should be higher than the liquid level of the suction port of the slurry pump, which has achieved the purpose of providing slurry to the slurry pump, so as to ensure that the slurry pump can operate normally and continuously, and the slurry in the slurry tank is emptied by the upsuspended function of the slurry pump.　　Property features:　　1. This series of slurry pumps are horizontal and double pump housing structures. The pump body and pump cover have metal linings. The lining can be used until it is worn out without replacement, extending the maintenance cycle and reducing operating costs.　　2. The outlet direction can be rotated and installed at eight angles.　　3. The bearing assembly adopts a unified structure, which facilitates the adjustment of the clearance between the impeller and the front guard plate, and can be removed as a whole during maintenance.The bearing is lubricated with grease.　　4. The shaft seal types include packing seal, impeller seal, and mechanical seal.　　5. Wide performance range, good cavitation performance and high efficiency.Multi-stage series technology can be used to meet long-distance transportation.　　6. The transmission methods include V-shaped triangle belt transmission, elastic coupling transmission, gear reducer transmission, hydraulic coupling transmission, frequency converter drive device, thyristor speed regulation, etc.Among them, the V-shaped triangle belt transmission includes CL, CV, CR, ZL, ZV, and ZR transmission.　　7. Overcurrent components are available in a variety of metal materials and increase depth.　　8. Adopt various speeds and variations.

Wear-resistant and corrosion-resistant slurry pumps play an important role in many industrial fields, especially in industries that need to deal with large amounts of slurry, such as mining, chemical industry, water conservancy, etc.Using this pump can improve production efficiency, reduce operating costs, and ensure the safety and stability of the production process.　　The design and manufacturing process of the pump fully considers wear and corrosion resistance.The overflow components of such pumps are usually made of high hard wear-resistant materials that resist wear of slurry.At the same time, the internal structure of the pump body has also been specially designed to reduce the flow resistance of slurry in the pump body and reduce energy consumption.Its excellent performance enables it to operate efficiently under various complex operating conditions.Whether in a slurry environment with high sand content, high concentration, high corrosion, or under harsh production conditions that require long-term continuous operation, it can work stably to ensure the continuity and stability of the production process.In addition, the use of wear-resistant and rot-resistant slurry pumps can also improve production efficiency.Due to its excellent wear and corrosion resistance, this pump can extend its service life and reduce the frequency of repairs and replacement.This not only reduces the cost of equipment maintenance, but also avoids production interruptions caused by equipment failure.At the same time, its high efficiency conveying capacity makes the processing and disposal process of slurry more efficient, thereby improving the efficiency of the entire production line.　　Some issues need to be paid attention to during use.For example, wear-resistant parts should be inspected and replaced regularly to prevent excessive wear from affecting performance; at the same time, attention should be paid to the sealing of the pump body to prevent slurry leakage from causing environmental pollution and production safety issues.　　In general, the use of this pump is one of the key factors in improving production efficiency.The excellent performance of this pump in treating slurry can not only ensure the continuity and stability of production, but also reduce operating costs and improve production efficiency.Its importance is even more prominent in industries that require the treatment of large amounts of slurry.Therefore, in these industries, selecting and using suitable wear-resistant and slurry pumps is one of the key steps to improve production efficiency.