● Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage.  The wet-end parts material is hard alloy has good wear resistance, corrosion resistance and high reliability.
● The bearing assembly is designed with high capacity bearings, and the bearing adopts grease lubrication and oil lubrication to adapt to different working conditions.
● The gap between the impeller and the backliner can be adjusted to ensure the efficient operation of the pump.
● The shaft seal adopts packing seal, expeller seal and mechanical seal to meet the requirements of different working conditions.
● The pump and drive machine can choose DC drive, CV drive, ZVZ and other drive methods.

The XU series slurry pump is an all-metal centrifugal heavy duty slurry pump, which combines the wet-end parts with the time -tested mechanical end.

Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump.

With its high efficiency, abrasion resistance, large particle passing capacity and flexible sealing options, the 8/6E-G gravel pump is ideal for conveying highly abrasive media, and is particularly suitable for long term, stable operation under severe conditions.

Type G(or GH)gravel pumps are designed for continously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump.

CNSME Slurry pumps are designed with double casing, wet-end parts, and rotary parts. Wet-end parts includes volute, impeller, front and back liner. The rotary parts includes the bearing assembly, which are composed of bearing housing, shaft, bearings etc.

CNSME®8/6F-AH horizontal slurry pump is a high-efficiency, wear-resistant, corrosion-resistant single-stage single-suction, cantilever, horizontal centrifugal slurry pump, which widely used in mining, electric power, metallurgy, coal, chemical industry and other industries. It is suitable for pumping highly abrasive, high-concentration slurry or low-concentration high head slurry. It can be used in multiple stages in series under the pump's max. allowable working pressure range.

Centrifugal pumps are specially designed pumping equipment to transfer high density sludge that contains big solids, and are widely used in mining, construction, and petrochemical industries, with the advantages of abrasion resistance, large conveying capacity and not prone to clogging.

AHF series horizontal froth pump is a high performance froth pump produced by CNSME, which is specially designed to handle heavy froth and high viscosity thick slurry.

300S-L type slurry pump is a kind of light slurry pump, which is widely used in many industries, such as beneficiation, metallurgy, coal and building materials.

300S-L type slurry pump is a kind of light slurry pump, which is widely used in many industries, such as beneficiation, metallurgy, coal and building materials.

L-type slurry pump is a kind of light slurry pump, which is widely used in many industries, such as beneficiation, metallurgy, coal and building materials.