Why Are Non-clogging Vortex Pumps So Popular?

　　Why are cyclone pumps so popular?The non-blocking cyclone pump has two types: discrete and horizontal type. The pump housing and impeller adopt a novel design concept. The impeller rotates in the pump body. The internal tension of the medium drives the medium in the pump body to rotate to form a vortex to obtain kinetic energy. Most of them do not pass through the impeller, but are discharged through the pump outlet after moving in the bladeless cavity, thereby achieving the purpose of transporting complex media or impurity-containing fluids. Most of the solid particles do not pass through the impeller, so the wear of the impeller is also reduced accordingly. The impeller's service life is long and does not exist.The gap increases after wear and causes the problem of degradation of performance. There is a large gap between the impeller and the front end cover of the pump body (30-90mm), which makes the pump free of blockage and good performance. It can pass solid particles approximately equivalent to the pump outlet diameter, and the impeller is not prone to fouling due to solid particles. In addition, the pump has good suction performance and good cavitation resistance. It can pump liquids with high gas content, and can also pump liquids with high concentration and high viscosity.The shaft adopts a heavy-duty shaft design, with strong load-bearing capacity, stable operation, and more reliable operation stability and stability.The pump housing and impeller adopt a novel design concept. The impeller rotates in the pump body. The internal tension of the medium drives the medium in the pump body flow channel to form a vortex to obtain kinetic energy. The medium in the pump body flow channel is thrown out through the pump body outlet, and the medium between the impeller and the impeller blades do not move relative to each other, which greatly extends the service life of the impeller, which is three times the life of a conventional centrifugal pump. There is a large gap between the impeller and the front end cover of the pump body (30-90mm), making this pump suitable for transporting corrosive liquids with large solid particles (particle size less than or equal to 20mm). In terms of structure, the impeller avoids the accident of the impeller being stuck due to solid particles, and overcurrent components such as the impeller are not prone to fouling, which overall solves the problems of short service life, frequent maintenance, and high equipment consumption.The non-blocking cyclone pump is suitable for the transport of large particles of corrosive media.It has more reliable operation stability and stability.This pump has been widely used in chemical industry, fertilizer, petroleum, papermaking, metallurgy and other industries.The main features of the non-blocking cyclone pump: 1. Stable operation: the concentricity of the pump shaft and the excellent dynamic and static balance of the impeller ensure smooth operation and vibration.2. No leakage: Cemented carbide of different materials ensures that there is no leakage in the transport of different media.3. Low noise: The water pump supported by two low-noise bearings runs smoothly, except for the weak sound of the motor, and basically no noise.4. Low failure rate: the structure is simple and reasonable, the key parts adopt good quality supporting facilities, and the working time of the whole machine is greatly improved.5. Convenient maintenance: Replace seals, bearings, simple and convenient.6. More saving in space: The unblocked cyclone pump outlet can be left, right and upward, so that the pipeline is arranged and installed, saving space.