What Parameters Are Required For Slurry Pump Selection? If You Don't Understand, Click In And Take A

The selection of slurry pumps is a very important task. There are many types of slurry pumps. We must choose the appropriate pump type according to the properties of the slurry and meet the working conditions.

According to its purpose, it includes ash pump, ash pump, circulation pump, desulfurization pump, filter press feed pump, liquid submersible pump, chemical pump, corrosion-resistant pump, submersible slurry pump, etc.

If the choice is not suitable, it will cause the pump to work in large or small flow, high or low head, material to resist wear, corrosion, etc. This is not only in the use of which cannot meet production requirements, and inefficient, short life, causing waste and loss.

In severe cases, other accidents may occur even in emergencies as the work is not going as expected.

The selection of the model is mainly based on flow and head.

It is necessary to know the small flow and large flow required by the device. When selecting a pump, it is based on the large flow rate. If the large flow rate is not given, it can usually be 1.11 times the normal flow rate.

In addition to considering the low intake liquid level and high water transfer height, the head required for the device system should also be considered.

Generally, when selecting a pump, take 1.04 to 1.11 times the system head.

After determining the two performance parameters of flow rate and head, determine which pump type is used according to the requirements of the device system.

In addition to its strong wear resistance, it also has the characteristics of high efficiency, good cavitation performance, stable operation, long service life and low speed and high head.

What parameters are needed to summarize the selection of slurry pumps?

1. Must parameters: head, flow, industry. These are the parameters that must be known for selection and are the basic conditions for slurry pump selection calculation; 2. In addition to the above parameters, if there are: slurry concentration, pipeline, pH value, even altitude, natural temperature, slurry temperature, etc., you can accurately select a better slurry pump.