How Important Is The Correct Use Of Sewage Pumps? Just Take A Look And You Will Know

　　How important is the correct use of sewage pumps? Just look at it. The correct use of sewage pumps is very important, because only by correct operation can we ensure that the normal-used sewage pump will not have any faults. At the same time, it also ensures the smooth operation of sewage pumps. So what are the precautions for the use of sewage pumps? Let’s take a look together! There are about eight precautions for the use of sewage pumps: 1. If there are any minor failures in sewage pumps, remember not to let them work.If the filler* of the pump shaft should be added in time after it wears, it will leak if the pump continues to use.The direct impact of this is that the motor energy consumption will increase and thus damage the impeller.2. If the sewage pump vibrates strongly during use, you must stop and check what the reason is, otherwise it will also cause damage to the water pump.3. When the bottom valve of the sewage pump leaks, some people will fill it with dry soil into the inlet pipe of the water pump and rinse it with water to the bottom valve. This is really undesirable.Because when dry soil is put into the water inlet pipe and the water pump starts to work, the dry soil will enter the pump, which will damage the water pump impeller and bearing, which will shorten the service life of the water pump.When the bottom valve leaks, it must be used for repair. If it is very serious, it needs to be replaced with a new one.4. Be sure to pay attention to maintenance after use of the sewage pump. For example, when the water pump is used up, the water in the water pump should be cleaned, and the water pipe can be removed and then rinsed with clean water.5. Remove the tape from the sewage pump, then rinse it with water and then dry it in a light place. Do not place the tape in a dark and humid place.The water pump tape must not be stained with oil, and do not apply sticky things on the tape.6. Carefully check whether there are cracks on the impeller, whether there is looseness on the bearing when the impeller is fixed to the bearing. If there are cracks and looseness, repair it in time. If there is soil on the impeller of the sewage pump, clean it up.7. The interface between the water pump and the pipeline must be sealed, because if debris enters, it will cause damage to the inside of the sewage pump.8. The bearings on the sewage pump are also the focus of inspection. After use, check whether the bearings are worn. If the water pump is used for a long time, the small balls in the bearing will break. Therefore, after the water pump is used, a layer of lubricating oil should be applied to the bearing to better protect the water pump bearing.The above are precautions for use. Of course, if you want to know more about the precautions for the use of sewage pumps, you should consult the after-sales service department. They will solve the problem quickly and conveniently. Of course, if there are product needs for sewage pumps, online customer service will help you in time.