Blog

Getting the right slurry pump is more than selecting equipment — it’s about improving your whole process. Getting the wrong equipment can result in inefficiency, constant breakdowns, and more expenses.

18/16T-G (CNSME Model SG/400G) Shield Slurry Pump, with a weight about 8.7 tons and a minimum dismantle clearance of 640mm, is often driven by a 1100kW motor. Its common accessories include shaft sleeve, packings, lantern ring, throatbush, frame plate liner insert, impeller and casing etc.

Quartz sand beneficiation focuses primarily on purification, a technically challenging separation process aimed at removing minor or trace impurities from quartz sand to produce refined quartz sand or high-purity quartz sand. Common purification techniques employed domestically and internationally include: Washing, Classification & Desliming, Scrubbing, Magnetic Separation, Flotation, Acid Leaching, and Microbial Leaching.

Selecting the right slurry pump ensures efficient performance, especially when dealing with high-volume and abrasive slurries. The ideal pump depends on the application, material compatibility, and operational demands.

Because of their strong durability, efficiency, and ability to adapt, these heavy duty slurry pumps help businesses achieve more and pay less. If you handle abrasive slurries, sand, gravel, or even froth, these machines can handle any situation.

The following techniques can be used to determine whether cavitation is occurring in a slurry pump:a. Ultrasonic testing b. External noise monitoring c. Vibration analysis

This material combines the wear resistance of high-chrome alloys with excellent corrosion resistance, particularly against acidic media. It is ideal for phosphoric and nitric acid pumps, offering outstanding performance and long service life.

The vibration issues in desulfurization circulation pumps can generally be attributed to the following factors:Installation Issues: Unstable foundation, misaligned couplings, or improperly installed discharge pipelines.

Because they offer longevity, efficiency, and adaptability, horizontal slurry pumps are crucial for sectors handling abrasive slurries. Knowing their values, applications, and maintenance needs allows businesses to maximize performance and reduce expenses.

Slurry pump commissioning must be strictly conducted in accordance with established procedures: Prior to startup, first activate the shaft seal water and adjust it to the specified pressure. Fully open the inlet valve. For non-backflow pumps, water must be injected. After opening the outlet valve to one-quarter, initiate startup; During operation, monitor flow rate, head, current, vibration, and bearing temperature (temperature rise ≤35°C, maximum ≤75°C). Mechanical seal leakage should be ≤3-5 ml/h. Before stopping the pump, flush with clean water for 30 minutes, close the outlet valve first, then shut down the pump, and finally close the shaft seal water and inlet valve. It is strictly prohibited to fully open the outlet valve when stopping the pump to prevent water hammer. Throughout the entire trial operation process, ensure that parameters remain stable, avoid cavitation and overload conditions, to ensure safe operation of the equipment.

Slurry pump including 6 performance parameters: flowrate, efficiency, head, speed, shaft power, permissible suction vacuum height, and NPSHr (net positive suction head)

Adjust the impeller clearance: Loosen the clamp bolt on the bearing assembly and use the adjustment screw to move the bearing assembly forward. At the same time, rotating the shaft clockwise until the impeller contacts the volute liner, and tighten the nut at the front end by adjusting the screw to move the bearing assembly backward, so that the clearance between the impeller and the volute liner will be within the range of 0.5-1 mm;

The 7th International Trade Fair for Pumps, Construction Machinery, Building Material Machines, Construction Vehicles & Equipment will be held in SHANGHAI,CHINA from November 25th to 28th, 2014. Our booth number E6.720, Hall E6.

We'll exhibit at MINExpo, Sept. 26th~28th, Las Vegas, USA, 2016. Welcome to visit us at North Hall, Booth 318 of the Las Vegas Convention Center.

On behalf of CNSME, we wish our friends from all over the world a Happy New Year 2018.

Order of 200ZJ slurry pump: ZJ slurry pumps were originated from China, and they are double casing slurry pumps, which are widely used in mining, power plants, and coal washing plants.

Plenty inventory of slurry pump parts. Not only for the below shown rubber liners, but also for metal pump parts such as impellers, volute liners, and so on.

Heavy duty slurry pump metal lined War-man 8/6F-AH with 980r/min, 220Kw Electric Motor driven by belts and pulleys, CRz, shipped to Kazakhstan.